What Are the Notices for Maintaining Vibrating Screen?

The vibrating screen produced by Hongxing Machinery has different principles from general screening equipment. When produces gravel, or the extraction of valuable ore raw material, the vibrating screen is necessary. Hongxing Machinery has rich experience in the design, production and maintenance of vibrating screen. The author summarizes several notices for maintenance and repair of vibrating screen as follows.

A. When installing new screens, firm and tighten evenly the hook of the screen and angle iron or steel on the sieves of the box bearing cage.
B. All parts must be cleaned and oiled before assembly.
C. The lifting equipment for hoisting the parts should have enough lifting capacity.
D. When assemble or removing parts, directly knocking them with a hammer is not allowed, a copper rod pad or the appropriate pads are required.
E. When one bearing is damaged, the two bearings should be replaced together.
F. When replacing the "o" ring, oil it and roll into the groove, stretching is not allowed.

G. When disassemble parts with precision, the surface of these parts should be taken special care to protect to prevent damage and dirt.
H. When disassembling parts with bearing surfaces or process components on their surfaces, make the parts to lie on the floor planks, prevent directly contact with the ground.

Due to working in a state of high frequency, the surface tension of pulp is damaged, and the oscillates of fine material in high speed on the screen surface can accelerate the separating of useful minerals and useless minerals, increase screening efficiency and achieve better screening effects.